Avanti Discovery 1 Low

2024 UrbanComfort Manufacturer page

Fork travel: 65 mm
Wheels: 700c
Drivetrain: 3 × 8 28–48t / 12–32t
Gear range: 457%
Frame: Aluminum
Brakes: Mechanical disc

Rider height by size (cm)

Size guide

SM 158–170
MD 168–179
LG 176–187

Components

12 of 22 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

ADT 6061 Formtech Alloy, Low Step Design Not identified

Suspension

1 part

Fork

HL 187 Suspension fork, 65mm Travel Not identified

Drivetrain

7 parts

Bottom bracket

Cartridge Not identified
Cassette
- Shimano CS-HG200 12–32t
CS-HG200
Chain
- KMC Z7 7 speeds
Z-7
Crankset
- Shimano FC-TY301 8 speeds 48/38/28t
FC-TY301
Front derailleur
- Shimano Tourney FD-TY510
FD-TY510
Rear derailleur
- Shimano Altus
Shifters
- Shimano ST-EF500
ST-EF500

Brakes

2 parts

Brake levers
- Shimano ST-EF500
ST-EF500
Brakes
- Tektro

Wheels and tires

5 parts

Front hub
- Shimano HB-TX505
HB-TX505
Rear hub
- Shimano Tourney FH-TY505 7 speeds
FH-TY505
Rims
- Alex Rims
Spokes

Stainless Steel Not identified
Tires
- Kenda Piedmont

Cockpit and contact points

6 parts

Grips

Zero Comfort Not identified
Handlebar

Alloy Riser 31.8mm, 17 deg rise, 15deg sweep 680mm Not identified
Headset

Integrated Aheadset 1-1/8" Not identified
Pedals

Nylon platform with ball bearings Not identified
Saddle

Zero Comfort Not identified
Seatpost

Alloy 27.2mm Micro Adjust with Suspension Not identified

Sizes and geometry

3 sizes Open in the geometry plotter

Enter your height to highlight matching ranges.

Size MD

Table

Reach 381mm

Stack 623mm

Wheelbase 1078mm

Head angle 70.0°

Seat angle 74.0°

Every size is drawn to the same scale, in millimeters. Explanatory schematic on an assumed 700c wheel; exact published values are in the table below.

Size Reported by the manufacturer

Complete manufacturer geometry table 3 published sizes

Complete manufacturer geometry by size
Measurement
Frame
Reachmm	367	381	390
Stackmm	604	623	642
Top tube lengthmm	540	560	580
Seat tube lengthmm	350	425	480
Head tube lengthmm	130	150	170
Head tube angle	70°	70°	70°
Seat tube angle	74°	74°	73.5°
Chainstay lengthmm	455	455	455
Wheelbasemm	1056	1078	1093
Front centermm	610	632	647
Bottom bracket dropmm	70	70	70
Standover heightmm	610	594	586
Fork rakemm	43	43	43
Trailmm	82	81	82
Stack/reach ratio	1.65	1.64	1.65
Suspension and parts
Crank lengthmm	170	170	170
Stem lengthmm	95	95	95

Not published by the manufacturer: Bottom bracket height, Front travel, Rear travel, Handlebar width, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Aluminum

Suspension

Suspension configuration: Hardtail
Front travel: 65 mm

Drivetrain

Derived by Bikelake

Front chainrings: 3
Smallest chainring: 28
Largest chainring: 48
Rear sprockets: 8
Smallest sprocket: 12
Largest sprocket: 32
Lowest gear: 25.4 in
Highest gear: 116.0 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Mechanical disc

Fit and controls

Seatpost: suspension
Shifting: Mechanical

Additional specifications

Tire width: 40c
Wheel material: Aluminum
Wheel size: 700c

Gearing

Estimated speeds at 80 rpm

Lowest gear: 9.7 km/h
Highest gear: 44.4 km/h

Total gear range 457%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.