CTM Raptor 2.0

2020 MountainDirt jump Manufacturer page

Fork travel: 120 mm
Wheels: 26″
Drivetrain: 1 × 8 32t / 11–32t
Gear range: 291%
Weight: 13.5 kg 29.8 lb · Reference configuration not specified
Frame: Aluminum
Brakes: Hydraulic disc

Rider height by size (cm)

Size guide

One Size 120+

Components

12 of 21 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

Aluminum Not identified

Suspension

2 parts

Fork
- SR Suntour XCR32
Rear shock

None

Drivetrain

8 parts

Bottom bracket
- FSA
Cassette
- SRAM PG-820 8 speeds
PG-820
Chain
- KMC Z7 7 speeds
Chain guide

Manobike upper and lower guides with bashguard Not identified
Crankset
- Prowheel
Front derailleur

None
Rear derailleur
- SRAM X3 7 speeds
Shifters
- SRAM X4 Trigger 3 speeds

Brakes

2 parts

Brake levers
- Shimano BL-MT200
BL-MT200
Brakes
- Shimano

Wheels and tires

4 parts

Front hub

CTM alloy, CENTER LOCK rotor mounts, 32 hole Not identified
Rear hub

CTM alloy, CENTER LOCK rotor mounts, 32 hole Not identified
Rims
- WTB
Tires
- WTB

Cockpit and contact points

6 parts

Handlebar

CTM HB-RB11, 680mm width, 31.8mm clamp diameter Not identified

HB-RB11
Headset
- Neco
Pedals

HT PA09 platform Not identified
Saddle

CTM SL Not identified
Seatpost

CTM SPDC1, 300mm length Not identified
Stem

CTM LCS, 50mm length, 31.8mm bar clamp Not identified

Sizes and geometry

1 size Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size One Size

Table

Geometry diagram unavailable

The drawing needs reach and stack, which the manufacturer did not publish. Available facts remain in the table.

Size Reported by the manufacturer

Complete manufacturer geometry table 1 published size

Complete manufacturer geometry by size
Measurement
Top tube lengthmm	585
Seat tube lengthmm	356
Head tube lengthmm	110
Head tube angle	68.5°
Seat tube angle	74°
Chainstay lengthmm	420
Wheelbasemm	1096
Front centermm	677
Bottom bracket dropmm	20
Bottom bracket heightmm	323

Not published by the manufacturer: Reach, Stack, Standover height, Fork rake, Trail, Stack/reach ratio, Front travel, Rear travel, Crank length, Handlebar width, Stem length, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Aluminum
Bicycle weight: 13.5 kg

29.8 lb

Suspension

Suspension configuration: Hardtail
Front travel: 120 mm

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 32
Largest chainring: 32
Rear sprockets: 8
Smallest sprocket: 11
Largest sprocket: 32
Lowest gear: 26.0 in
Highest gear: 75.6 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Hydraulic disc

Fit and controls

Seatpost: Rigid seatpost
Shifting: Mechanical

Additional specifications

Fork spring: Coil
Tire width: 2.3″
Wheel material: Aluminum
Wheel size: 26″

Technical analysis

1 measure

How these figures sit among bicycles of the same class and model year. Context, not a ranking.

Front travel

120 mm

This value is above the central range for this class.

Cohort: Mountain / Dirt jump Model year: 2020
Sample: 62 bicycles with this information
Coverage: 93.9% of the class

Gearing

Estimated speeds at 80 rpm

Lowest gear: 10.0 km/h
Highest gear: 29.0 km/h

Total gear range 291%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.