Diamondback El Oso Niño 20"

2021 YouthGeneral youth Manufacturer page

Last known price: $575

Prices shown first for United States
Suspension: Rigid
Wheels: 20″
Drivetrain: 1 × 7 40t / 14–28t
Gear range: 200%
Frame: Steel
Brakes: Mechanical disc

Sizes

Size guide

The manufacturer did not publish rider heights for these sizes.

Components

7 of 22 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

20" Hi-Ten Steel Junior Fat Bike, for Disc Brake Only Not identified

Suspension

1 part

Fork

20" Hi-Ten Steel Junior Rigid, w/ Disc Tabs Not identified

Drivetrain

6 parts

Bottom bracket

Square Taper - 5pc Not identified
Cassette
- Shimano MF-TZ21 14–28t
MF-TZ21
Chain
- KMC
Crankset

152mm Steel w/ 40T Single Ring Not identified
Rear derailleur
- Shimano Tourney RD-FT35
RD-FT35
Shifters
- Shimano SL-RS35
SL-RS35

Brakes

2 parts

Brake levers

Alloy Lever Not identified
Brakes
- SRAM Apex

Wheels and tires

5 parts

Front hub

Steel 32h Disc, 3/8" Nutted, 135mm OLD Not identified
Rear hub

Steel 32h Disc, Freewheel, 3/8" Nutted, 180mm OLD Not identified
Rims

32h Jr Fatty Alloy Not identified
Spokes

14g Steel Not identified
Tires

Chaoyang 20x4.0" Not identified

Cockpit and contact points

7 parts

Grips

DB Kraton Not identified
Handlebar

Alloy, 560mm Wide, 22.2mm Bar Bore Not identified
Headset

Threadless Not identified
Pedals

9/16" Resin Not identified
Saddle
- Diamondback
Seatpost

Steel 27.2mm Not identified
Stem
- ProMax

Sizes and geometry

1 size Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size 20"

Table

Geometry diagram unavailable

The drawing needs reach, stack and bottom bracket drop / Bottom bracket height, which the manufacturer did not publish. Available facts remain in the table.

Size

Complete manufacturer geometry table 1 published size

Complete manufacturer geometry by size
Measurement
Frame
Top tube lengthmm	508
Seat tube lengthmm	272
Head tube lengthmm	115
Head tube angle	71°
Seat tube angle	70°
Chainstay lengthmm	380
Wheelbasemm	927
Standover heightmm	576
Fork rakemm	45
Suspension and parts
Crank lengthmm	152
Handlebar widthmm	560
Stem lengthmm	90
Seatpost lengthmm	260

Not published by the manufacturer: Reach, Stack, Front center, Bottom bracket drop, Bottom bracket height, Trail, Stack/reach ratio, Front travel, Rear travel, Stem angle and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Steel
Fork material: Steel

Suspension

Suspension configuration: Rigid

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 40
Largest chainring: 40
Rear sprockets: 7
Smallest sprocket: 14
Largest sprocket: 28
Lowest gear: 28.6 in
Highest gear: 57.1 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Mechanical disc

Fit and controls

Seatpost: Rigid seatpost
Shifting: Mechanical

Additional specifications

Tire width: 4″
Travel: Front: Additional specification: Not available: Yes
Wheel material: Aluminum
Wheel size: 20″

Gearing

Estimated speeds at 80 rpm

Lowest gear: 10.9 km/h
Highest gear: 21.9 km/h

Total gear range 200%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.