GT Dyno Pro Compe 24

Name: GT Dyno Pro Compe 24
Brand: GT

2024 BMX Manufacturer page

Last known price: $850

Prices shown first for United States
Suspension: Rigid
Wheels: 24″
Drivetrain: 1 × 1 36t / 16t
Gear range: 100%
Frame: Steel
Brakes: Rim brake

Rider height by size (cm)

Size guide

One Size 120+

Components

9 of 20 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

Dyno 87' Pro Compe, 100% Cr-Mo, DT Gusset, Mid BB, Inverted Seat Stay V-Brake, Integrated 1-1/8" H/T w/ Removable Rotor Tabs, 2.5" Tire Clearance Not identified

Suspension

1 part

Fork

Dyno 87' Pro Compe, 100% Cr-Mo, 1pc. Threaded Steerer, Brake Mounts Not identified

Drivetrain

4 parts

Bottom bracket

Sealed Mid 22mm Not identified
Cassette

16T Cog Not identified
Chain
- KMC Z1 Wide 1 speed
Crankset
- GT 36t

Brakes

2 parts

Brake levers

NBS Alloy Not identified
Brakes

Aluminum V-Brake (R), Alloy U-Brake (F) Not identified

Wheels and tires

5 parts

Front hub
- GT
Rear hub
- GT
Rims

Alloy Double Wall, 36h Not identified
Spokes

Stainless Steel, 14g Not identified
Tires
- GT

Cockpit and contact points

7 parts

Grips
- GT
Handlebar

Dyno Pretzel Cheat Code 2pc. 100% Cr-Mo, 7.875"H x 31.5"W, 5°Up, 9° Back Not identified
Headset

1 1/8" Integrated Design, 45X45 Degree Sealed Bearings Not identified
Pedals
- GT
Saddle
- GT
Seatpost

Alloy Micro Adjust, 25.4 x 300mm Not identified
Stem
- GT

Sizes and geometry

1 size Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size One Size

Table

Geometry diagram unavailable

The drawing needs wheelbase, reach, stack, head tube length, seat tube length and chainstay length, which the manufacturer did not publish. Available facts remain in the table.

Size Reported by the manufacturer

Complete manufacturer geometry table 1 published size

Complete manufacturer geometry by size
Measurement
Head tube angle	74.5°
Seat tube angle	71°
Bottom bracket dropmm	13.38
Fork rakemm	1.26

Not published by the manufacturer: Reach, Stack, Top tube length, Seat tube length, Head tube length, Chainstay length, Wheelbase, Front center, Bottom bracket height, Standover height, Trail, Stack/reach ratio, Front travel, Rear travel, Crank length, Handlebar width, Stem length, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Steel
Fork material: Steel

Suspension

Suspension configuration: Rigid

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 36
Largest chainring: 36
Rear sprockets: 1
Smallest sprocket: 16
Largest sprocket: 16
Lowest gear: 54.0 in
Highest gear: 54.0 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Rim brake

Fit and controls

Seatpost: Rigid seatpost
Shifting: No shifting

Additional specifications

Tire clearance: Maximum tire width: 2.5″
Tire width: 2.5″
Wheel material: Aluminum
Wheel size: 24″

Gearing

Estimated speeds at 80 rpm

Lowest gear: 20.7 km/h
Highest gear: 20.7 km/h

Total gear range 100%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.