Haro Mini

2024 BMX Manufacturer page

Last known price: $599

Prices shown first for United States
Suspension: Rigid
Wheels: 20″
Drivetrain: 1 × 1 38t / 38t
Gear range: 100%
Frame: Aluminum
Brakes: Rim brake

Rider height by size (cm)

Size guide

20" 120+

Components

5 of 19 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

6061-T6 Heat Treated Alloy Frame w/ Integrated Headtube, Internal Cable Routing, Smooth Welding & Haro 3D Dropouts w/ Integrated Chain Tensioner. 17.75" top tube length Not identified

Suspension

1 part

Fork

Full Chromoly 1" Threadless Steerer Not identified

Drivetrain

4 parts

Bottom bracket

Sealed Bearing Square Taper Not identified
Cassette

38t Alloy Chainring Not identified
Chain
- KMC
Crankset

3-pc Forged Alloy - 130mm - 38t Alloy Chainring Not identified

Brakes

2 parts

Brake levers
- Tektro
Brakes
- Tektro

Wheels and tires

4 parts

Front hub

28h Alloy sealed bearing Not identified
Rear hub

28h Alloy sealed bearing, 14T cassette Not identified
Rims

20" Alloy 28h, Double Wall Not identified
Tires
- Kenda Kompact

Cockpit and contact points

7 parts

Grips

Mini Micro-Knurl Grip Not identified
Handlebar
- Haro
Headset

1" Semi-Sealed Threadless Not identified
Pedals

Mini Alloy DX, 9/16" Not identified
Saddle

One-piece Mini seat/post combo Not identified
Seatpost

Alloy, 22.2mm Not identified
Stem

Forged Alloy Top-Load, 45mm Ext. Not identified

Sizes and geometry

1 size Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size 20"

Table

Geometry diagram unavailable

The drawing needs wheelbase, reach, stack and head tube length, which the manufacturer did not publish. Available facts remain in the table.

Size Reported by the manufacturer

Complete manufacturer geometry table 1 published size

Complete manufacturer geometry by size
Measurement
Top tube lengthmm	451
Seat tube lengthmm	211
Head tube angle	72°
Seat tube angle	71°
Chainstay lengthmm	338
Bottom bracket heightmm	279
Standover heightmm	470

Not published by the manufacturer: Reach, Stack, Head tube length, Wheelbase, Front center, Bottom bracket drop, Fork rake, Trail, Stack/reach ratio, Front travel, Rear travel, Crank length, Handlebar width, Stem length, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Aluminum
Fork material: Steel

Suspension

Suspension configuration: Rigid

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 38
Largest chainring: 38
Rear sprockets: 1
Smallest sprocket: 38
Largest sprocket: 38
Lowest gear: 20.0 in
Highest gear: 20.0 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Rim brake

Fit and controls

Seatpost: Rigid seatpost
Shifting: No shifting

Additional specifications

Wheel material: Aluminum
Wheel size: 20″

Gearing

Estimated speeds at 80 rpm

Lowest gear: 7.7 km/h
Highest gear: 7.7 km/h

Total gear range 100%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.