Haro Thread One

2021 MountainDirt jump Manufacturer page

Last known price: $999

Prices shown first for United States
Fork travel: 100 mm
Wheels: 26″
Drivetrain: 1 × 1 30t / 14t
Gear range: 100%
Frame: Aluminum
Brakes: Hydraulic disc

Rider height by size (cm)

Size guide

Thread One 120+

Components

8 of 18 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

Haro Full X6 Aluminum Thread frame | Internal head tube | 68mm Threaded BSA | ISCG Mount Not identified

Suspension

1 part

Fork
- Manitou

Drivetrain

4 parts

Bottom bracket

24mm Axle w/ 4 x Sealed bearing Not identified
Cassette

14T Chromoly cog Not identified
Chain
- KMC
Crankset
- Haro 30t

Brakes

2 parts

Wheels and tires

4 parts

Front hub

Pivit sealed bearing aluminum disc | singlespeed cassette | 20mm front thru axle | 32h Not identified
Rear hub

Pivit sealed bearing aluminum disc | singlespeed cassette | 20mm front thru axle | 32h Not identified
Rims
- Weinmann
Tires
- Kenda Small Block 8

Cockpit and contact points

6 parts

Handlebar

Pivit Aluminum 30mm riser bar | 760mm wide | 9 Deg. back sweep Not identified
Headset

FPD Dozer | 1-1/8"-1.5" Aluminum | lower AC Bearing Not identified
Pedals

New FPD Platform | Chromoly 9/16" axles | Replaceable Pins Not identified
Saddle
- Haro
Seatpost

Pivit Aluminum 31.6mm | 2-Bolt Not identified
Stem

Pivit 3D-Forged Aluminum 1-1/8" | 50mm Ext. Not identified

Sizes and geometry

1 size Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size Thread One

Table

Reach 410mm

Stack 554mm

Wheelbase 1052mm

Head angle 68.5°

Seat angle 69.0°

Every size is drawn to the same scale, in millimeters. Explanatory schematic on an assumed 26″ wheel; exact published values are in the table below.

Size Reported by the manufacturer

Complete manufacturer geometry table 1 published size

Complete manufacturer geometry by size
Measurement
Frame
Reachmm	410
Stackmm	554
Top tube lengthmm	593
Seat tube lengthmm	320
Head tube lengthmm	115
Head tube angle	68.5°
Seat tube angle	69°
Chainstay lengthmm	390
Wheelbasemm	1052
Front centermm	662
Bottom bracket dropmm	15
Bottom bracket heightmm	328
Standover heightmm	692
Fork rakemm	41
Trailmm	95
Stack/reach ratio	1.35
Suspension and parts
Crank lengthmm	170
Handlebar widthmm	760
Stem lengthmm	50

Not published by the manufacturer: Front travel, Rear travel, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Aluminum

Suspension

Suspension configuration: Hardtail
Front travel: 100 mm

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 30
Largest chainring: 30
Rear sprockets: 1
Smallest sprocket: 14
Largest sprocket: 14
Lowest gear: 55.7 in
Highest gear: 55.7 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Hydraulic disc

Fit and controls

Seatpost: Rigid seatpost
Shifting: No shifting

Additional specifications

Bottom bracket standard: BSA
Tire width: 2.35″
Wheel material: Aluminum
Wheel size: 26″

Technical analysis

1 measure

How these figures sit among bicycles of the same class and model year. Context, not a ranking.

Front travel

100 mm

This value is within the central range for this class.

Cohort: Mountain / Dirt jump Model year: 2021
Sample: 68 bicycles with this information
Coverage: 91.8% of the class

Gearing

Estimated speeds at 80 rpm

Lowest gear: 21.3 km/h
Highest gear: 21.3 km/h

Total gear range 100%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.

This bicycle: 55.7–55.7 gear inches

Lineup changes

The published facts that differ across this family's builds and from the same model a year earlier. Missing information never counts as zero.

Differences across 2021 builds
Specification	This bicycle Haro Thread One	Haro Thread Slope	Haro Thread Two
Suspension
Suspension configuration	Hardtail	Full suspension	Hardtail
Brakes
Brake type	Hydraulic disc	Mechanical disc	Mechanical disc
Other specifications
Bottom bracket standard	BSA	392 EVO	BSA
Suspension	Hardtail	Full suspension	Hardtail
Travel	Configuration: HardtailFront: Travel: 100 mm	Configuration: Full suspensionFront: Travel: 100 mmRear: Additional specification: Not available: No	Configuration: HardtailFront: Travel: 100 mm
Fork spring	Not informed	Air	Air