The manufacturer did not publish rider heights for these sizes.
Components
18 of 22 identified
Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.
PartComponentPart no.
Frame and fork
1 part
Frame
KELLYS iCAD Carbon Pro 29", tapered HT, internal routing, 12x148 mm Boost thru axle
Not identified
KLS Ultimate - diam 28.6 mm / bar bore 31.8 mm / 7° / length 80 mm (M), 90 mm (L)
Sizes and geometry
2 sizes
Size explorer
Rider-height ranges are not published for these sizes.
Understanding sizes and measurements
Height ranges are reported by the manufacturer. A matching range is a starting point, not a guarantee of fit. Your proportions and bike setup also matter.
Reach is the horizontal distance from the bottom bracket to the top of the head tube; stack is the vertical distance.
Positive values mean more reach or stack than the reference size; zero means the same measurement. Missing values are not estimated.
Size
Geometry not published
The manufacturer lists these sizes without frame measurements, so there is no drawing or geometry table.
Specifications
Frame and fork
Intended fit
Unisex
Frame material
Carbon
Suspension
Suspension configuration
Hardtail
Front travel
100 mm
Drivetrain
Derived by Bikelake
Front chainrings
1
Smallest chainring
34
Largest chainring
34
Rear sprockets
12
Smallest sprocket
10
Largest sprocket
51
Lowest gear
19.3 in
Highest gear
98.6 in
Wheels and brakes
Wheel configuration
Same size
Brake type
Hydraulic disc
Fit and controls
Seatpost
Rigid seatpost
Shifting
Mechanical
Additional specifications
Bottom bracket standard
BB86/BB92
Fork spring
Air
Tire width
57c
Wheel material
Aluminum
Wheel size
29″
Technical analysis
2 measures
How these figures sit among bicycles of the same class and model year. Context, not a ranking.
Front travel
How we calculated this
Observed range: 10 mm to 170 mm. Median: 100 mm.
100mm
This value is within the central range for this class.
80 mmTypical range110 mm
Cohort
Mountain / Cross-country
Model year: 2025
Sample
1,508 bicycles with this information
Coverage
87.8% of the class
Shifting
How we calculated this
This analysis describes frequency, not preference.
Mechanical
222 of 1,648 bicycles with this information use electronic shifting.
Electronic 13.4%Mechanical 86.5%
Cohort
Mountain / Cross-country
Model year: 2025
Sample
1,648 bicycles with this information
Coverage
95.9% of the class
Gearing
Estimated speeds at 80 rpm
This bicycle
Lowest gear
7.4 km/h
Highest gear
37.8 km/h
015304560
Total gear range510%
These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.
Gear-inch range
Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.
0100 gear inches
This bicycle
19.3–98.6 gear inches
Other models in this family
3 models
Published versions from the same family and model year.