Marin Pine Mountain 2

2017 MountainCross-country Manufacturer page

Wheels: 27.5″
Drivetrain: 1 × 11 32t / 11–42t
Gear range: 382%
Frame: Steel
Brakes: Hydraulic disc

Sizes

Size guide

The manufacturer did not publish rider heights for these sizes.

Components

19 of 20 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

Columbus Thron Butted and Formed CrMo, 27.5+ Wheels, Boost 148x12mm Naild Locking Thru-Axle Dropouts Not identified

Suspension

1 part

Fork
- Fox 34

Drivetrain

7 parts

Bottom bracket
- Shimano
Cassette
- Shimano Deore XT CS-M8000 11 speeds 11–42t
CS-M8000
Chain
- KMC
Crankset
- Shimano Deore XT 32t
Front derailleur

None
Rear derailleur
- Shimano Deore XT
Shifters
- Shimano Deore XT SL-M8000
SL-M8000

Brakes

2 parts

Wheels and tires

4 parts

Cockpit and contact points

7 parts

Sizes and geometry

5 sizes Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size LG

Table

Reach 435mm

Stack 626mm

Wheelbase 437mm

Head angle 69.0°

Seat angle 73.5°

Every size is drawn to the same scale, in millimeters. Explanatory schematic on an assumed 27.5″ wheel; exact published values are in the table below.

Size Reach Stack

Complete manufacturer geometry table 5 published sizes

Complete manufacturer geometry by size
Measurement
Frame
Reachmm	385.3	413.3	434.6	452.5	462.4
Stackmm	621.1	621.1	625.8	639.8	667.8
Top tube lengthmm	570	598	621	644	664
Seat tube lengthmm	390	440	482	525	570
Head tube lengthmm	110	110	115	130	160
Head tube angle	69°	69°	69°	69°	69°
Seat tube angle	73.5°	73.5°	73.5°	73.5°	73.5°
Chainstay lengthmm	437	437	437	437	437
Wheelbasemm	437	437	437	437	437
Bottom bracket dropmm	51	51	51	51	51
Standover heightmm	706	748	778	819	860
Fork rakemm	51	51	51	51	51
Stack/reach ratio	1.61	1.50	1.44	1.41	1.44
Suspension and parts
Crank lengthmm	170	175	175	175	175
Stem lengthmm	60	60	60	60	60

Not published by the manufacturer: Front center, Bottom bracket height, Trail, Front travel, Rear travel, Handlebar width, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Steel

Suspension

Suspension configuration: Hardtail

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 32
Largest chainring: 32
Rear sprockets: 11
Smallest sprocket: 11
Largest sprocket: 42
Lowest gear: 21.0 in
Highest gear: 80.0 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Hydraulic disc

Fit and controls

Seatpost: Rigid seatpost
Shifting: Mechanical

Additional specifications

Bottom bracket standard: BSA
Fork spring: Air
Tire width: 3″
Travel: Front: Additional specification: Not available: No
Wheel material: Aluminum
Wheel size: 27.5″

Technical analysis

2 measures

How these figures sit among bicycles of the same class and model year. Context, not a ranking.

Lowest gear

21.0 gear inches

This value is above the central range for this class.

Cohort: Mountain / Cross-country Model year: 2017
Sample: 607 bicycles with this information
Coverage: 96.0% of the class

Highest gear

80.0 gear inches

This value is below the central range for this class.

Cohort: Mountain / Cross-country Model year: 2017
Sample: 607 bicycles with this information
Coverage: 96.0% of the class

Gearing

Estimated speeds at 80 rpm

Lowest gear: 8.0 km/h
Highest gear: 30.6 km/h

Total gear range 382%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.

This bicycle: 21.0–80.0 gear inches
Class reference (p10–p90): 17.0–110.0 gear inches; The band runs from p10 for the lowest gear to p90 for the highest gear.

Cohort: Mountain / Cross-country Model year: 2017
Lowest gear: 607 bicycles with this information, 96.0% of the class
Highest gear: 607 bicycles with this information, 96.0% of the class

Lineup changes

The published facts that differ across this family's builds and from the same model a year earlier. Missing information never counts as zero.

Differences across 2017 builds
Specification	This bicycle Marin Pine Mountain 2	Marin Pine Mountain 1	Marin Pine Mountain
Frame
Fork material	Not informed	Aluminum	Steel
Suspension
Suspension configuration	Hardtail	Hardtail	Rigid
Front travel	Not informed	120 mm	Not informed
Drivetrain
Rear sprockets	11	11	10
Other specifications
Bottom bracket standard	BSA	Not informed	Not informed
Fork spring	Air	Air	Not informed
Suspension	Hardtail	Hardtail	Rigid
Tire width	3″	2.9″	2.9″