Pinarello Lungavita

2020 RoadTrack

Suspension: Rigid
Wheels: 700c
Drivetrain: 1 × 1 46t / 18t
Gear range: 100%
Frame: Aluminum
Brakes: Rim brake

Sizes

Size guide

48cm
53cm
56cm

The manufacturer did not publish rider heights for these sizes.

Components

4 of 16 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

6061 Double Butted Alloy Not identified

Suspension

1 part

Fork

Full Carbon, 12k Not identified

Drivetrain

4 parts

Bottom bracket

Threaded Not identified
Cassette

18t, Fixed/Freewheel Not identified
Chain
- KMC
Crankset

Alloy, 3/32", 46t Not identified

Brakes

2 parts

Brake levers

Alloy Cross Not identified
Brakes
- Pivot

Wheels and tires

2 parts

Rims

Alloy, High Profile, Stainless Spokes Not identified
Tires
- Vittoria

Cockpit and contact points

6 parts

Handlebar

Alloy Track Not identified
Headset

1 1/8" Not identified
Pedals

Not Included Not identified
Saddle
- Pinarello
Seatpost

MOst Tiger AL, 31.6mm Not identified
Stem

MOst Tigermax Alloy31.6mm Not identified

Sizes and geometry

3 sizes Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size 53cm

Table

Geometry diagram unavailable

The drawing needs wheelbase and bottom bracket drop / Bottom bracket height, which the manufacturer did not publish. Available facts remain in the table.

Size Reach Stack

Complete manufacturer geometry table 3 published sizes

Complete manufacturer geometry by size
Measurement
Reachmm	379	394	397
Stackmm	541	582	605
Top tube lengthmm	536	567	582
Seat tube lengthmm	480	530	560
Head tube lengthmm	135	180	204
Head tube angle	72.5°	73°	73°
Seat tube angle	74°	73.5°	73°
Chainstay lengthmm	404	404	404
Stack/reach ratio	1.43	1.48	1.52

Not published by the manufacturer: Wheelbase, Front center, Bottom bracket drop, Bottom bracket height, Standover height, Fork rake, Trail, Front travel, Rear travel, Crank length, Handlebar width, Stem length, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Aluminum
Fork material: Carbon

Suspension

Suspension configuration: Rigid

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 46
Largest chainring: 46
Rear sprockets: 1
Smallest sprocket: 18
Largest sprocket: 18
Lowest gear: 74.1 in
Highest gear: 74.1 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Rim brake

Fit and controls

Seatpost: Rigid seatpost
Shifting: No shifting

Additional specifications

Bottom bracket standard: BSA
Tire width: 25c
Wheel material: Aluminum
Wheel size: 700c

Gearing

Estimated speeds at 80 rpm

Lowest gear: 28.4 km/h
Highest gear: 28.4 km/h

Total gear range 100%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.