Production Privée Shan GT 037 Limited Edition

Name: Production Privée Shan GT 037 Limited Edition
Brand: Production Privée

2020 MountainEnduro Manufacturer page

Fork travel: 150 mm
Wheels: 29″
Drivetrain: 1 × 12 32t / 10–50t
Gear range: 500%
Frame: Steel
Brakes: Hydraulic disc

Rider height by size (cm)

Size guide

SM 158–171
MD 168–180
LG 178–189
XL 186–199

Components

16 of 21 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

Chromoly Not identified

Suspension

2 parts

Fork
- Cane Creek
Rear shock

None

Drivetrain

8 parts

Brakes

2 parts

Brake levers
- Magura
Brakes
- Magura

Wheels and tires

5 parts

Cockpit and contact points

7 parts

Grips

Production Privee CR35 adjustable Not identified
Handlebar

Production Privee LGB, 780mm width Not identified
Headset

IS42 upper, IS52 lower Not identified
Pedals

None
Saddle
- Fizik
Seatpost
- Bike Yoke
Stem

Production Privee R2R, 50mm length Not identified

Sizes and geometry

4 sizes Open in the geometry plotter

Enter your height to highlight matching ranges.

Size MD

Table

Reach 404mm

Stack 643mm

Wheelbase 1134mm

Head angle 66.6°

Seat angle 73.7°

Every size is drawn to the same scale, in millimeters. Explanatory schematic on an assumed 29″ wheel; exact published values are in the table below.

Size Reported by the manufacturer

Complete manufacturer geometry table 4 published sizes

Complete manufacturer geometry by size
Measurement
Reachmm	384	404	428	451
Stackmm	639	643	648	653
Top tube lengthmm	570	590	615	640
Seat tube lengthmm	400	430	460	490
Head tube lengthmm	105	105	110	115
Head tube angle	66.6°	66.6°	66.6°	66.6°
Seat tube angle	73.7°	73.7°	73.7°	73.7°
Chainstay lengthmm	427	427	427	427
Wheelbasemm	1114	1134	1160	1185
Front centermm	693	713	739	764
Bottom bracket dropmm	58	58	58	58
Bottom bracket heightmm	316	316	316	316
Fork rakemm	51	49	49	49
Trailmm	106	109	109	109
Stack/reach ratio	1.66	1.59	1.51	1.45

Not published by the manufacturer: Standover height, Front travel, Rear travel, Crank length, Handlebar width, Stem length, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Steel

Suspension

Suspension configuration: Hardtail
Front travel: 150 mm

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 32
Largest chainring: 32
Rear sprockets: 12
Smallest sprocket: 10
Largest sprocket: 50
Lowest gear: 18.6 in
Highest gear: 92.8 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Hydraulic disc

Fit and controls

Seatpost: Dropper seatpost
Shifting: Mechanical

Additional specifications

Bottom bracket standard: BB86/BB92
Fork spring: Air
Tire width: 2.4″
Wheel material: Aluminum
Wheel size: 29″

Technical analysis

4 measures

How these figures sit among bicycles of the same class and model year. Context, not a ranking.

Front travel

150 mm

This value is below the central range for this class.

Cohort: Mountain / Enduro Model year: 2020
Sample: 829 bicycles with this information
Coverage: 98.5% of the class

Lowest gear

18.6 gear inches

This value is within the central range for this class.

Cohort: Mountain / Enduro Model year: 2020
Sample: 705 bicycles with this information
Coverage: 83.8% of the class

Highest gear

92.8 gear inches

This value is within the central range for this class.

Cohort: Mountain / Enduro Model year: 2020
Sample: 705 bicycles with this information
Coverage: 83.8% of the class

Shifting

Mechanical

50 of 841 bicycles with this information use electronic shifting.

Cohort: Mountain / Enduro Model year: 2020
Sample: 841 bicycles with this information
Coverage: 100.0% of the class

Gearing

Estimated speeds at 80 rpm

Lowest gear: 7.1 km/h
Highest gear: 35.5 km/h

Total gear range 500%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.

This bicycle: 18.6–92.8 gear inches
Class reference (p10–p90): 17.3–93.5 gear inches; The band runs from p10 for the lowest gear to p90 for the highest gear.

Cohort: Mountain / Enduro Model year: 2020
Lowest gear: 705 bicycles with this information, 83.8% of the class
Highest gear: 705 bicycles with this information, 83.8% of the class

Lineup changes

The published facts that differ across this family's builds and from the same model a year earlier. Missing information never counts as zero.

Differences across 2020 builds

Differences across 2020 builds
Specification	This bicycle Production Privée Shan GT 037 Limited Edition	Production Privée Shan 037 Limited Edition	Production Privée Shan Classic	Production Privée Shan GT Classic	Production Privée Shan N.5 037 Limited Edition	Production Privée Shan N.5 Classic
Suspension
Suspension configuration	Hardtail	Hardtail	Hardtail	Hardtail	Full suspension	Full suspension
Front travel	150 mm	140 mm	140 mm	140 mm	150 mm	150 mm
Rear travel	Not informed	Not informed	Not informed	Not informed	140 mm	140 mm
Drivetrain
Lowest gear	18.6 in	17.6 in	17.6 in	18.6 in	18.6 in	18.6 in
Highest gear	92.8 in	88.0 in	88.0 in	92.8 in	92.8 in	92.8 in
Other specifications
Fork spring	Air	Air	Not informed	Not informed	Not informed	Not informed
Suspension	Hardtail	Hardtail	Hardtail	Hardtail	Full suspension	Full suspension
Wheel material	Aluminum	Aluminum	Aluminum	Aluminum	Carbon	Aluminum
Wheel size	29″	27.5″	27.5″	29″	29″	29″