Redline D26

2014 MountainDirt jump

Fork travel: 100 mm
Wheels: 26″
Drivetrain: 1 × 1 25t / 13t
Gear range: 100%
Frame: Steel
Brakes: Hydraulic disc

Rider height by size (cm)

Size guide

One Size 120+

Components

11 of 16 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

Full 4130 Chromoly with Mid BB and integrated headtube Not identified

Suspension

1 part

Fork
- SR Suntour

Drivetrain

5 parts

Bottom bracket

68mm Mid BB Not identified
Cassette

13T Not identified
Chain
- KMC
Crankset
- Redline 25t
Shifters
- Avid

Brakes

1 part

Brakes
- SRAM DB5

Wheels and tires

2 parts

Cockpit and contact points

6 parts

Grips
- Redline
Handlebar
- Kore
Headset
- FSA IMPACT
Saddle

RL Standard padding, 8mm chromoly rails Not identified
Seatpost

Alloy micro-adjust for 8mm rails, OD27.2mm Not identified
Stem
- Kore

Sizes and geometry

1 size Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size One Size

Table

Geometry diagram unavailable

The drawing needs reach and stack, which the manufacturer did not publish. Available facts remain in the table.

Size Reported by the manufacturer

Complete manufacturer geometry table 1 published size

Complete manufacturer geometry by size
Measurement
Frame
Top tube lengthmm	590
Seat tube lengthmm	330
Head tube lengthmm	117
Head tube angle	69.5°
Seat tube angle	72.5°
Chainstay lengthmm	400
Wheelbasemm	1061
Front centermm	662
Bottom bracket dropmm	25.4
Bottom bracket heightmm	318
Standover heightmm	725
Fork rakemm	40
Suspension and parts
Crank lengthmm	170
Handlebar widthmm	780
Stem lengthmm	40

Not published by the manufacturer: Reach, Stack, Trail, Stack/reach ratio, Front travel, Rear travel, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Steel

Suspension

Suspension configuration: Hardtail
Front travel: 100 mm

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 25
Largest chainring: 25
Rear sprockets: 1
Smallest sprocket: 13
Largest sprocket: 13
Lowest gear: 50.0 in
Highest gear: 50.0 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Hydraulic disc

Fit and controls

Seatpost: Rigid seatpost
Shifting: No shifting

Additional specifications

Wheel material: Aluminum
Wheel size: 26″

Gearing

Estimated speeds at 80 rpm

Lowest gear: 19.2 km/h
Highest gear: 19.2 km/h

Total gear range 100%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.