Specialized P.3

2010 MountainDirt jump Manufacturer page

Fork travel: 80 mm
Wheels: 26″
Drivetrain: 1 × 1 28t / 13t
Gear range: 100%
Frame: Aluminum
Brakes: Hydraulic disc

Rider height by size (cm)

Size guide

LG 120+

Components

8 of 20 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

P. Series A1 Premium Aluminum, double-butted ORE DT, forged HT/ISCG BB/chainstay yoke/horizontal dropouts, integrated chain tensioner and axle carrier, multispeed hardware, disc only, 6mm offset rear triangle Not identified

Suspension

1 part

Fork
- Marzocchi

Drivetrain

4 parts

Bottom bracket

Fuse SL Euro, Alloy threaded cup, 4x cartridge bearing, Machined alloy cone spacers Not identified
Cassette

Single speed, Cr-Mo, 1/8"" x 13t Not identified
Chain
- KMC
Crankset

Fuse SL 2pc. heat treated Sanko Cr-Mo tubular arms, hollow 19mm Cr-Mo spindle Not identified

Brakes

2 parts

Wheels and tires

5 parts

Front hub

Forged Alloy, cartridge bearing, 20mm thru-axle, machined Hi-Lo flanges and disc mount, 36h Not identified
Rear hub

Forged alloy single speed cassette, machined flanges and disc mount, cartridge bearings, 36h, nutted 3/8"" axle, 1/8"" x 13t cog Not identified
Rims

P.3 Disc, double wall disc w/ eyelets, 36h Not identified
Spokes

2mm (14g) stainless Not identified
Tires
- Specialized

Cockpit and contact points

7 parts

Grips

Fuse BMX clamp-on, open end, 136mm Not identified
Handlebar

Alloy riser bar, 60mm riser, 685mm wide, 8 degree back sweep, 6 degree up Not identified
Headset
- FSA
Pedals
- Specialized
Saddle
- Specialized
Seatpost

Alloy two bolt, no offset, micro adjust, 30.9mm Not identified
Stem

SBC Aggro Stem, 3D forged/CNC, 4-bolt, 35mm length Not identified

Sizes and geometry

1 size Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size LG

Table

Reach 409mm

Stack 574mm

Wheelbase 1063mm

Head angle 68.5°

Seat angle 72.0°

Every size is drawn to the same scale, in millimeters. Explanatory schematic on an assumed 26″ wheel; exact published values are in the table below.

Size Reported by the manufacturer

Complete manufacturer geometry table 1 published size

Complete manufacturer geometry by size
Measurement
Frame
Reachmm	409
Stackmm	574
Top tube lengthmm	595
Seat tube lengthmm	370
Head tube lengthmm	108
Head tube angle	68.5°
Seat tube angle	72°
Chainstay lengthmm	394
Wheelbasemm	1063
Front centermm	673
Bottom bracket dropmm	42
Bottom bracket heightmm	301
Standover heightmm	677
Fork rakemm	49
Trailmm	82
Stack/reach ratio	1.40
Suspension and parts
Crank lengthmm	175
Handlebar widthmm	680
Stem lengthmm	40
Seatpost lengthmm	300

Not published by the manufacturer: Front travel, Rear travel, Stem angle and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Aluminum
Fork material: Aluminum

Suspension

Suspension configuration: Hardtail
Front travel: 80 mm

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 28
Largest chainring: 28
Rear sprockets: 1
Smallest sprocket: 13
Largest sprocket: 13
Lowest gear: 56.0 in
Highest gear: 56.0 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Hydraulic disc

Fit and controls

Seatpost: Rigid seatpost
Shifting: No shifting

Additional specifications

Bottom bracket standard: BSA
Fork spring: Coil
Tire width: 2.3″
Wheel material: Aluminum
Wheel size: 26″

Gearing

Estimated speeds at 80 rpm

Lowest gear: 21.4 km/h
Highest gear: 21.4 km/h

Total gear range 100%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.

This bicycle: 56.0–56.0 gear inches

Lineup changes

The published facts that differ across this family's builds and from the same model a year earlier. Missing information never counts as zero.

Differences across 2010 builds

Differences across 2010 builds
Specification	This bicycle Specialized P.3	Specialized P.1	Specialized P.1 All Mountain Disc	Specialized P.2	Specialized P.2 Cr-Mo
Frame
Frame material	Aluminum	Steel	Aluminum	Aluminum	Aluminum
Fork material	Aluminum	Steel	Aluminum	Aluminum	Steel
Suspension
Front travel	80 mm	Not informed	100 mm	80 mm	Not informed
Drivetrain
Front chainrings	1	1	3	Not informed	Not informed
Smallest chainring	28	25	22	Not informed	Not informed
Largest chainring	28	25	42	Not informed	Not informed
Rear sprockets	1	1	8	8	8
Smallest sprocket	13	12	11	11	11
Largest sprocket	13	12	32	28	28
Lowest gear	56.0 in	54.2 in	17.9 in	Not informed	Not informed
Highest gear	56.0 in	54.2 in	99.3 in	Not informed	Not informed
Brakes
Brake type	Hydraulic disc	Mechanical disc	Mechanical disc	Hydraulic disc	Mechanical disc
Cockpit
Shifting	No shifting	No shifting	Mechanical	Mechanical	Mechanical
Other specifications
Bottom bracket standard	BSA	BSA	Not informed	BSA	BSA
Tire width	2.3″	2.3″	2.2″	2.3″	2.3″