Haro Downtown 20 DLX

2024 BMX Manufacturer page

Last known price: $499

Prices shown first for United States
Suspension: Rigid
Wheels: 20″
Drivetrain: 1 × 1 25t / 25t
Gear range: 100%
Frame: Steel
Brakes: Rim brake

Sizes

Size guide

19.5"
20.5"

The manufacturer did not publish rider heights for these sizes.

Components

5 of 19 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

Steel Frame w/ 1-1/8" Integrated Headtube, MID BB Shell, 990 Brake Mounts & 14mm Axle Drop-outs,13.1"CS 74.5° HT Not identified

Suspension

1 part

Fork

Steel 1-1/8" Thredless w/ Tapered Legs 32mm offset Not identified

Drivetrain

4 parts

Bottom bracket

Sealed Bearing MID Not identified
Cassette

25t Steel Baseline Chainring Not identified
Chain

Baseline Chain Not identified
Crankset
- Haro 25t

Brakes

2 parts

Brake levers
- Haro
Brakes

Radius Alloy 990 U-Brake Front & Rear w/ GYRO Not identified

Wheels and tires

4 parts

Front hub

36h Alloy Sealed Front Not identified
Rear hub

Alloy 9t Sealed Cassette Rear Not identified
Rims

20" Alloy 36h, Single Wall Not identified
Tires
- Haro

Cockpit and contact points

7 parts

Grips
- Haro
Handlebar
- Haro
Headset

Integrated 1-1/8" Threadless Sealed Bearing Not identified
Pedals

Poly Platform, Cr-Mo 9/16" Axle Not identified
Saddle

Baseline 5° Seat/ Post Combo Not identified
Seatpost

Aluminium 25.4mm Not identified
Stem

Baseline 48mm reach Not identified

Sizes and geometry

2 sizes Open in the geometry plotter

Complete rider-height ranges are not published for these sizes. You can still explore the geometry below.

Size 19.5"

Table

Geometry diagram unavailable

The drawing needs wheelbase, reach, stack and head tube length, which the manufacturer did not publish. Available facts remain in the table.

Size

Complete manufacturer geometry table 2 published sizes

Complete manufacturer geometry by size
Measurement
Top tube lengthmm	495	521
Seat tube lengthmm	249	249
Head tube angle	74.5°	74.5°
Seat tube angle	70°	70°
Chainstay lengthmm	348	348
Bottom bracket heightmm	292	292
Standover heightmm	546	546

Not published by the manufacturer: Reach, Stack, Head tube length, Wheelbase, Front center, Bottom bracket drop, Fork rake, Trail, Stack/reach ratio, Front travel, Rear travel, Crank length, Handlebar width, Stem length, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Steel
Fork material: Steel

Suspension

Suspension configuration: Rigid

Drivetrain

Derived by Bikelake

Front chainrings: 1
Smallest chainring: 25
Largest chainring: 25
Rear sprockets: 1
Smallest sprocket: 25
Largest sprocket: 25
Lowest gear: 20.0 in
Highest gear: 20.0 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Rim brake

Fit and controls

Seatpost: Rigid seatpost
Shifting: No shifting

Additional specifications

Tire width: 2.4″
Wheel material: Aluminum
Wheel size: 20″

Gearing

Estimated speeds at 80 rpm

Lowest gear: 7.7 km/h
Highest gear: 7.7 km/h

Total gear range 100%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.