Merida Time Warp TRI Limited

2027 RoadTriathlon Manufacturer page

Suspension: Rigid
Wheels: 700c
Drivetrain: 2 × 12 36–52t / 11–30t
Gear range: 394%
Frame: Carbon
Brakes: Hydraulic disc

Rider height by size (cm)

Size guide

XS 151–164
SM 159–170
MD 165–177
LG 171–184

Components

15 of 18 identified

Parts found in a manufacturer catalog show their brand, model and key numbers, and the steps show how precisely they are identified: brand, series, model, or the exact product. The info button has every detail and the text the manufacturer published.

Frame and fork

1 part

Frame

TIME-WARP TRI CF5 IV, material: carbon, 700x30C max. wheelsize, 100x12/ 142x12mm axle standard, Pressfit 86,5 Not identified

Suspension

1 part

Fork

MEARIDA TIME-WARP TRI CF5 IV disc, material: carbon, 700x30C max. wheelsize Not identified

Drivetrain

7 parts

Bottom bracket

BB86/BB92, 86mm, press-fit Not identified
Cassette
- Shimano Ultegra CS-R8101-12 12 speeds
CS-R8101-12
Chain
- Shimano Deore CN-M6100
CN-M6100
Crankset
- Shimano Ultegra
Front derailleur
- Shimano Ultegra
Rear derailleur
- Shimano Ultegra RD-R8150 12 speeds
RD-R8150
Shifters
- Shimano Dura-Ace ST-R9180
ST-R9180

Brakes

3 parts

Wheels and tires

2 parts

Cockpit and contact points

4 parts

Sizes and geometry

4 sizes Open in the geometry plotter

Enter your height to highlight matching ranges.

Size SM

Table

Reach 381mm

Stack 518mm

Wheelbase 988mm

Head angle 72.0°

Seat angle 76.0°

Every size is drawn to the same scale, in millimeters. Explanatory schematic on an assumed 700c wheel; exact published values are in the table below.

Size Reported by the manufacturer

Complete manufacturer geometry table 4 published sizes

Complete manufacturer geometry by size
Measurement
Reachmm	376	381	417	427
Stackmm	496	518	533	574
Top tube lengthmm	490	510	550	570
Seat tube lengthmm	460	500	540	580
Head tube lengthmm	110	130	130	173
Head tube angle	71°	72°	72°	72°
Seat tube angle	77°	76°	76°	76°
Chainstay lengthmm	415	415	415	415
Wheelbasemm	984	988	1022	1045
Front centermm	575	579	617	640
Bottom bracket dropmm	55	55	70	70
Bottom bracket heightmm	281	281	266	266
Standover heightmm	752	781	799	838
Fork rakemm	42	43	43	43
Trailmm	71	64	64	64
Stack/reach ratio	1.32	1.36	1.28	1.34

Not published by the manufacturer: Front travel, Rear travel, Crank length, Handlebar width, Stem length, Stem angle, Seatpost length and Dropper post travel.

Specifications

Frame and fork

Intended fit: Unisex
Frame material: Carbon
Fork material: Carbon

Suspension

Suspension configuration: Rigid

Drivetrain

Derived by Bikelake

Front chainrings: 2
Smallest chainring: 36
Largest chainring: 52
Rear sprockets: 12
Smallest sprocket: 11
Largest sprocket: 30
Lowest gear: 34.8 in
Highest gear: 137.1 in

Wheels and brakes

Wheel configuration: Same size
Brake type: Hydraulic disc

Fit and controls

Seatpost: Rigid seatpost
Shifting: Electronic

Additional specifications

Bottom bracket standard: BB86/BB92
Tire clearance: Maximum tire width: 30c; Additional specification: Wheel kind: 700
Tire width: 28c
Wheel material: Carbon
Wheel size: 700c

Gearing

Estimated speeds at 80 rpm

Lowest gear: 13.3 km/h
Highest gear: 52.5 km/h

Total gear range 394%

Technical details and class reference

These speeds describe the gearing at the selected cadence, not how fast you can ride.
Calculated from published gear-inch values and their wheel-size assumptions.
These gearing values describe the bicycle, not a selected frame size.
A 100% range means one ratio; 500% means the highest ratio is five times the lowest.
For e-bikes, motor assistance cutoff is not represented.

Gear-inch range

Lower gear-inch values travel less distance per pedal revolution; higher values travel farther.